Low pressure fabric reinforced hydraulic hose

1. Structure: The fabric hose is composed of an inner rubber layer, a single or multi-layer fabric winding layer, a spiral steel wire reinforcement layer and an outer rubber layer.

2. Features: The hose has the advantages of small outer diameter tolerance, oil resistance, heat resistance and other excellent properties, lightweight, soft and durable pipe body. The minimum burst pressure of the hose is four times the working pressure.

3. Use: Each type of cloth steel wire suction hose is based on the different transport media, the selection of the corresponding material manufacturing, product structure design is reasonable, good quality, strong and durable, is a kind of used

Suction (negative pressure condition) a variety of liquid viscous fluid and powdery solid material medium flexible hose.

4. Type:

φ13-305mm cloth-resistant oil hose, water and air cloth-resistant hose, high-temperature steam cloth-resistant hose, wear-resistant sandblast cloth-resistant hose, thin acid (alkali) cloth-resistant hose and special media conveying cloth-resistant hose and other cloth-reinforced hose design pressure is 5-10kg/Cm,φ25 below the longest up to 100 meters, φ32 above the size of 4-20M. The design pressure is 3-7kg/Cm. If additional pressure is required, cord braid and additional metal spiral wire can be added.

5. Can be customized according to the requirements of the corresponding pressure specifications of the hose, large diameter pipe and shaped pipe, expansion pipe, bend pipe, pure hose.

Cloth conveyor hose

1. Structure: The fabric hose is composed of an inner rubber layer, a single or multi-layer fabric winding layer and an outer rubber layer.

2. Features: The hose has the advantages of small outer diameter tolerance, oil resistance, heat resistance and other excellent properties, lightweight, soft and durable pipe body. The minimum burst pressure of the hose is four of the working pressure

Times. 3. Use: all types of cloth hose are root

According to the different conveying medium, the selection of the corresponding material manufacturing, product structure design is reasonable, good quality, strong and durable, is a kind of flexible hose used to transport (positive pressure conditions) a variety of liquid viscous fluid and powdery solid material media.

4. Type:

φ13-305mm cloth-resistant oil hose, water and air cloth-resistant hose, high-temperature steam cloth-resistant hose, wear-resistant sandblast cloth-resistant hose, thin acid (alkali) cloth-resistant hose and special media conveying cloth-resistant hose and other cloth-reinforced hose design pressure is 5-10kg/Cm,φ25 below the longest up to 100 meters, φ32 above the size of 4-20M. The design pressure is 3-7kg/Cm. If additional pressure is required, cord braid and additional metal spiral wire can be added.

5. Can be customized according to the requirements of the corresponding pressure specifications of the hose, large diameter pipe and shaped pipe, expansion pipe, bend pipe, pure hose.

1, water hose: suitable for general water transmission, used in -20°C- 45°C environment.

2, air hose: suitable for conveying compressed air and inert gas, used in 20°C- 45°C environment.

3, oil-resistant hose: suitable for transporting conventional petroleum fuel, used in -20°C--45°C environment.

4, heat-resistant hose: suitable for conveying water below 100°C.

5, durable acid and alkali hose: transport concentration of dilute acid and alkali solution below 40%, used in 20°C- 45°C environment.

6, sand blasting hose: suitable for metal surface style pressure sand blasting rust removal and grinding.

7, suction drainage, oil hose: working pressure 1.0-1.5MPa(4 times the safety factor)